![background image](http://html1.mh-extra.com/html/thermo-king/sb-210/sb-210_operators-manual_1104425132.webp)
Optional Rear Remote Control Panel
131
Stand By
If the Rear Remote Control Action is set to STAND BY, the
control system will power up when the Rear Remote Control
Panel ON key is pressed, but the unit will not start and run.
Pressing the Rear Remote Control Panel OFF key will power
down the control system. The HMI Control Panel on the unit
must be used to start and stop unit operation. Only the setpoint
can be changed from the Rear Remote Control panel. Other
than On and Off and changing setpoint, no other functions are
available from the Rear Remote Control Panel. The unit will
not start and run.
If the control system is powered up from the remote control
panel a stand by message will appear in both the remote control
panel display and the unit HMI control panel display as shown
in Figure 94 and Figure 95.
Figure 94: Rear Remote Control Panel Display
Figure 95: Unit HMI Control Panel Display
Optional Rear Remote Control Panel
131
Stand By
If the Rear Remote Control Action is set to STAND BY, the
control system will power up when the Rear Remote Control
Panel ON key is pressed, but the unit will not start and run.
Pressing the Rear Remote Control Panel OFF key will power
down the control system. The HMI Control Panel on the unit
must be used to start and stop unit operation. Only the setpoint
can be changed from the Rear Remote Control panel. Other
than On and Off and changing setpoint, no other functions are
available from the Rear Remote Control Panel. The unit will
not start and run.
If the control system is powered up from the remote control
panel a stand by message will appear in both the remote control
panel display and the unit HMI control panel display as shown
in Figure 94 and Figure 95.
Figure 94: Rear Remote Control Panel Display
Figure 95: Unit HMI Control Panel Display
Summary of Contents for SB-210+
