Jump Starting
173
6.
Connect the red positive (+) jumper cable to the positive
(+) battery terminal on the unit’s battery. Do not let the
other end of the jumper cable touch anything that conducts
electricity.
7.
Connect the other end of the red positive (+) jumper cable
to the positive (+) battery terminal on the good battery.
8.
Connect the black negative (–) jumper cable to the
negative (–) battery terminal on the good battery. Do not
let the other end of the jumper cable touch anything that
conducts electricity.
9.
Connect the black negative (–) jumper cable to the lower
starter mounting bolt on the unit’s engine.
CAUTION: Allowing the positive (+) jumper cable
to short can produce dangerous sparks.
1.
Lower Starter Mounting Bolt
Figure 127: Unit Engine
1
Jump Starting
173
6.
Connect the red positive (+) jumper cable to the positive
(+) battery terminal on the unit’s battery. Do not let the
other end of the jumper cable touch anything that conducts
electricity.
7.
Connect the other end of the red positive (+) jumper cable
to the positive (+) battery terminal on the good battery.
8.
Connect the black negative (–) jumper cable to the
negative (–) battery terminal on the good battery. Do not
let the other end of the jumper cable touch anything that
conducts electricity.
9.
Connect the black negative (–) jumper cable to the lower
starter mounting bolt on the unit’s engine.
CAUTION: Allowing the positive (+) jumper cable
to short can produce dangerous sparks.
1.
Lower Starter Mounting Bolt
Figure 127: Unit Engine
1
Summary of Contents for SB-210+
