Operating Instructions
118
NOTE: Alarm Code 127 may be generated if the
+
or
-
soft keys are used to change the named product, but the
Y
ES
or
N
O
soft keys are not used to accept or decline the
new named product.
8.
The “Programming Named Product” Screen will briefly
appear. See Figure 87.
NOTE: If the “Change Setpoint for XXXXX” Screen
appears, the named product has been programmed with
a setpoint range. See “Selecting the Setpoint for a
Named Product” on page 120.
9.
The “New Named Product Is XXXXX” Screen briefly
appears. See Figure 87.
10. The Standard Display appears with the new named
product. See Figure 87.
NOTE: Pressing the
E
XIT
soft key at any point will return to
the Standard Display.
NOTE: If no keys are pressed for 30 seconds while in the
Named Product Changer Screens, the HMI will return to the
Standard Display.
Operating Instructions
118
NOTE: Alarm Code 127 may be generated if the
+
or
-
soft keys are used to change the named product, but the
Y
ES
or
N
O
soft keys are not used to accept or decline the
new named product.
8.
The “Programming Named Product” Screen will briefly
appear. See Figure 87.
NOTE: If the “Change Setpoint for XXXXX” Screen
appears, the named product has been programmed with
a setpoint range. See “Selecting the Setpoint for a
Named Product” on page 120.
9.
The “New Named Product Is XXXXX” Screen briefly
appears. See Figure 87.
10. The Standard Display appears with the new named
product. See Figure 87.
NOTE: Pressing the
E
XIT
soft key at any point will return to
the Standard Display.
NOTE: If no keys are pressed for 30 seconds while in the
Named Product Changer Screens, the HMI will return to the
Standard Display.
Summary of Contents for SB-210+
