![background image](http://html1.mh-extra.com/html/thermo-king/sb-210/sb-210_operators-manual_1104425126.webp)
Operating Instructions
125
Selecting a Setpoint
To select or change a setpoint complete the following steps.
1.
Begin at the Standard Display.
If the Temperature Watch Display is showing, press the
M
ENU
soft key once to return to the Standard Display.
2.
Press the
P
RODUCT
/S
ETPOINT
soft key on the Standard
Display. See Figure 91.
3.
The “Named Product / Numeric Setpoint?” Screen briefly
appears, then the “Named Product or Numeric Setpoint?”
Screen will appear. See Figure 92.
4.
Press the
N
UMERIC
soft key. See Figure 92.
5.
The “Setpoint” Screen briefly appears, then the “Current
Setpoint Is” Screen will appear. See Figure 92.
6.
Press the
+
or
-
soft keys to change the setpoint. See
Figure 92.
7.
Press the
Y
ES
or
N
O
soft key accordingly as described
below. See Figure 92.
•
If the
N
O
key is pressed the setpoint change made with the
“+” or “-” soft keys
will not
be accepted, the setpoint will
not be changed and the display will return to the Standard
Display.
•
If the
Y
ES
soft key is pressed, the setpoint change made
with the “+” or “-” soft keys will be accepted, and the
following screens will appear.
8.
The “Programming New Setpoint” Screen will appear. See
Figure 92.
1.
Standard Display
2.
Product/Setpoint Soft Key
Figure 91: Selecting or Changing Setpoint
1
2
Operating Instructions
125
Selecting a Setpoint
To select or change a setpoint complete the following steps.
1.
Begin at the Standard Display.
If the Temperature Watch Display is showing, press the
M
ENU
soft key once to return to the Standard Display.
2.
Press the
P
RODUCT
/S
ETPOINT
soft key on the Standard
Display. See Figure 91.
3.
The “Named Product / Numeric Setpoint?” Screen briefly
appears, then the “Named Product or Numeric Setpoint?”
Screen will appear. See Figure 92.
4.
Press the
N
UMERIC
soft key. See Figure 92.
5.
The “Setpoint” Screen briefly appears, then the “Current
Setpoint Is” Screen will appear. See Figure 92.
6.
Press the
+
or
-
soft keys to change the setpoint. See
Figure 92.
7.
Press the
Y
ES
or
N
O
soft key accordingly as described
below. See Figure 92.
•
If the
N
O
key is pressed the setpoint change made with the
“+” or “-” soft keys
will not
be accepted, the setpoint will
not be changed and the display will return to the Standard
Display.
•
If the
Y
ES
soft key is pressed, the setpoint change made
with the “+” or “-” soft keys will be accepted, and the
following screens will appear.
8.
The “Programming New Setpoint” Screen will appear. See
Figure 92.
1.
Standard Display
2.
Product/Setpoint Soft Key
Figure 91: Selecting or Changing Setpoint
1
2
Summary of Contents for SB-210+
