![background image](http://html1.mh-extra.com/html/thermo-king/sb-210/sb-210_operators-manual_1104425039.webp)
Unit Description
38
Overload Relay—Manual Reset (Model 50):
An
overload relay protects the standby electric motor. The
overload relay opens the circuit to the electric motor if the
motor overloads for any reason (e.g., low line voltage or
improper power supply) while the unit is on electric standby
operation. The microprocessor will record Alarm Code 90.
Press the reset button on the high voltage tray to reset the
overload relay. The high voltage tray is located behind the
lower access panel on the compressor side of the unit.
Smart FETs:
Smart FETs in the controller interface board
protect some circuits and components from an overcurrent
condition.
Fuses:
A number of fuses, located on the interface board,
protect various circuits and components. The interface board is
located inside the control box. Refer to the appropriate
Microprocessor Controller Diagnostic Manual for more
information about the fuses.
Fuse
Size
Function
F2
15A
2AB Power
F3
40A
Fuel Sol Pull-In/Starter Circuit
F4
None
2A
No Fuse - All Bosch and Thermo King
Alternators
2A Fuse - All Prestolite Alternators
F5
60A
Preheat Circuit
F6
15A
Damper and High Speed Circuits
F7
2A
8XP Circuit - Controller On Feedback to
HMI
F8
5A
CAN Connector J12
F9
5A
CAN Connector J14
F10
10A
8X Power (Install fuse in upper position)
F11
10A
Power to LLS1 (Not Used)
F12
5A
CAN Connector J13
F13
2A
8FC Circuit (Remote Lights)
F15
P/S
On/Off Relay
F20
2A
Alternator Sense
F22
Not Used
F23
Not Used
Fuse
Size
Function
Unit Description
38
Overload Relay—Manual Reset (Model 50):
An
overload relay protects the standby electric motor. The
overload relay opens the circuit to the electric motor if the
motor overloads for any reason (e.g., low line voltage or
improper power supply) while the unit is on electric standby
operation. The microprocessor will record Alarm Code 90.
Press the reset button on the high voltage tray to reset the
overload relay. The high voltage tray is located behind the
lower access panel on the compressor side of the unit.
Smart FETs:
Smart FETs in the controller interface board
protect some circuits and components from an overcurrent
condition.
Fuses:
A number of fuses, located on the interface board,
protect various circuits and components. The interface board is
located inside the control box. Refer to the appropriate
Microprocessor Controller Diagnostic Manual for more
information about the fuses.
Fuse
Size
Function
F2
15A
2AB Power
F3
40A
Fuel Sol Pull-In/Starter Circuit
F4
None
2A
No Fuse - All Bosch and Thermo King
Alternators
2A Fuse - All Prestolite Alternators
F5
60A
Preheat Circuit
F6
15A
Damper and High Speed Circuits
F7
2A
8XP Circuit - Controller On Feedback to
HMI
F8
5A
CAN Connector J12
F9
5A
CAN Connector J14
F10
10A
8X Power (Install fuse in upper position)
F11
10A
Power to LLS1 (Not Used)
F12
5A
CAN Connector J13
F13
2A
8FC Circuit (Remote Lights)
F15
P/S
On/Off Relay
F20
2A
Alternator Sense
F22
Not Used
F23
Not Used
Fuse
Size
Function
Summary of Contents for SB-210+
