![background image](http://html1.mh-extra.com/html/thermo-king/sb-210/sb-210_operators-manual_1104425123.webp)
Operating Instructions
122
Changing the Setpoint for a Named
Product
If the named product has been programmed with a setpoint
range, the setpoint for the named product can be changed.
Complete the following steps to change the setpoint for a
named product. This example shows the Standard Display with
the
P
RODUCT
/S
ETPOINT
soft key. Using the Standard Display
with the
P
RODUCT
soft key is basically the same but some of
the screens differ slightly.
1.
Begin at the Standard Display.
If the Temperature Watch Display is showing, press the
M
ENU
soft key once to return to the Standard Display.
2.
Press the
P
RODUCT
/S
ETPOINT
(or
P
RODUCT
) soft key on
the Standard Display. See Figure 89.
3.
The “Named Product, Numeric Setpoint or Change
Setpoint?” (or Named Product or Change Setpoint?)
Screen will appear. See Figure 90.
4.
Press the
C
HANGE
SP
soft key. See Figure 90.
5.
The “Change Setpoint for XXXXX” Screen briefly
appears, then the “Current Setpoint for XXXXX &
Setpoint Range Is XX to XX” Screen will appear. See
Figure 90.
6.
Press the
+
or
-
soft keys to change the setpoint reading.
See Figure 90.
1.
Standard Display
2.
Product/Setpoint Soft Key
Figure 89: Changing Setpoint for Named Product
1
2
Operating Instructions
122
Changing the Setpoint for a Named
Product
If the named product has been programmed with a setpoint
range, the setpoint for the named product can be changed.
Complete the following steps to change the setpoint for a
named product. This example shows the Standard Display with
the
P
RODUCT
/S
ETPOINT
soft key. Using the Standard Display
with the
P
RODUCT
soft key is basically the same but some of
the screens differ slightly.
1.
Begin at the Standard Display.
If the Temperature Watch Display is showing, press the
M
ENU
soft key once to return to the Standard Display.
2.
Press the
P
RODUCT
/S
ETPOINT
(or
P
RODUCT
) soft key on
the Standard Display. See Figure 89.
3.
The “Named Product, Numeric Setpoint or Change
Setpoint?” (or Named Product or Change Setpoint?)
Screen will appear. See Figure 90.
4.
Press the
C
HANGE
SP
soft key. See Figure 90.
5.
The “Change Setpoint for XXXXX” Screen briefly
appears, then the “Current Setpoint for XXXXX &
Setpoint Range Is XX to XX” Screen will appear. See
Figure 90.
6.
Press the
+
or
-
soft keys to change the setpoint reading.
See Figure 90.
1.
Standard Display
2.
Product/Setpoint Soft Key
Figure 89: Changing Setpoint for Named Product
1
2
Summary of Contents for SB-210+
