manualshive.com logo in svg

Thermo King SB-210+, Operator'S Manual

The Thermo King SB-210+ Operator's Manual is a comprehensive guide that provides step-by-step instructions on how to operate and maintain your Thermo King SB-210+ unit. This essential manual is available for free download at manualshive.com, ensuring you have easy access to vital information for optimizing the performance and longevity of your product.

Share
Download
background image

Operating Instructions

102

7.

You now choose to program a Sleep mode Wake-up Time 
or simply enter Sleep mode immediately. Press the 

N

O

 soft 

key to immediately enter Sleep mode.

a.

The display will show “SLEEP” and the unit will start 
and stop as required to keep engine warm and/or the 
battery charged. Sleep mode does not maintain the 
compartment temperature. 

b.

Press the 

E

XIT

 soft key to exit Sleep mode or turn the 

unit off and back on. The unit will resume normal 
operation and control to setpoint.

8.

To enter a Wake-up Time verify that the unit clock is set 
properly (see “Time Display” on page 114). Then press the 

Y

ES

 soft key at the “Program A Wake-Up Time?” Screen.

9.

Press the 

+

 or 

-

soft keys to select the day the unit is to 

restart in normal operation. In this example Monday has 
been chosen. Press the 

Y

ES

 soft key to confirm the day.

10. The display will now prompt you for the hour the unit is to 

restart in normal operation. In this example 18:00 hours 
has been chosen. Note that 24 hour “military time” is used. 
Press the 

Y

ES

 soft key to confirm the hour. 

11. The display will now prompt you for the minute the unit is 

to restart in normal operation. In this example 18:37 hours 
has been chosen. Press the 

Y

ES

 soft key to confirm the 

minute.

12. The display will now prompt you to “Run A Pretrip On 

Wake-Up?” Press 

Y

ES

 soft key or the 

N

O

soft key 

accordingly and the display will show the unit is 
programming the Sleep mode.

13. The display will show “SLEEP” and the unit will start and 

stop as required to keep the engine warm and/or the 
battery charged. Sleep mode does not maintain setpoint.

14. The unit will restart at the programmed time (in this 

example 18:37 hours) and perform a Pretrip (if selected). 
After the Pretrip is complete the test results will be 
displayed and the unit will resume normal operation and 
control to setpoint. 

15. To exit Sleep mode before the selected Wake-up time 

press the 

E

XIT

 soft key or turn the unit off and back on. 

The unit will resume normal operation and control to 
setpoint.

Operating Instructions

102

7.

You now choose to program a Sleep mode Wake-up Time 
or simply enter Sleep mode immediately. Press the 

N

O

 soft 

key to immediately enter Sleep mode.

a.

The display will show “SLEEP” and the unit will start 
and stop as required to keep engine warm and/or the 
battery charged. Sleep mode does not maintain the 
compartment temperature. 

b.

Press the 

E

XIT

 soft key to exit Sleep mode or turn the 

unit off and back on. The unit will resume normal 
operation and control to setpoint.

8.

To enter a Wake-up Time verify that the unit clock is set 
properly (see “Time Display” on page 114). Then press the 

Y

ES

 soft key at the “Program A Wake-Up Time?” Screen.

9.

Press the 

+

 or 

-

soft keys to select the day the unit is to 

restart in normal operation. In this example Monday has 
been chosen. Press the 

Y

ES

 soft key to confirm the day.

10. The display will now prompt you for the hour the unit is to 

restart in normal operation. In this example 18:00 hours 
has been chosen. Note that 24 hour “military time” is used. 
Press the 

Y

ES

 soft key to confirm the hour. 

11. The display will now prompt you for the minute the unit is 

to restart in normal operation. In this example 18:37 hours 
has been chosen. Press the 

Y

ES

 soft key to confirm the 

minute.

12. The display will now prompt you to “Run A Pretrip On 

Wake-Up?” Press 

Y

ES

 soft key or the 

N

O

soft key 

accordingly and the display will show the unit is 
programming the Sleep mode.

13. The display will show “SLEEP” and the unit will start and 

stop as required to keep the engine warm and/or the 
battery charged. Sleep mode does not maintain setpoint.

14. The unit will restart at the programmed time (in this 

example 18:37 hours) and perform a Pretrip (if selected). 
After the Pretrip is complete the test results will be 
displayed and the unit will resume normal operation and 
control to setpoint. 

15. To exit Sleep mode before the selected Wake-up time 

press the 

E

XIT

 soft key or turn the unit off and back on. 

The unit will resume normal operation and control to 
setpoint.

Summary of Contents for SB-210+


















































































































































































































Reviews:

No comments

Related manuals for SB-210+

Hanbay RC Series Manual preview
RC Series
Brand: Hanbay Pages: 18
Danfoss FP735Si Installation Manual preview
FP735Si
Brand: Danfoss Pages: 20
Danfoss CP715 Si Installation & User'S Instructions preview
CP715 Si
Brand: Danfoss Pages: 36
Dahua DHI-ARC3008C User Manual preview
DHI-ARC3008C
Brand: Dahua Pages: 137
Jung KNX 230011 SU Quick Start Manual preview
KNX 230011 SU
Brand: Jung Pages: 8
KELD KLT11IB Specification And Operating Instructions preview
KLT11IB
Brand: KELD Pages: 2
Maintronic CBA UP Manual preview
CBA UP
Brand: Maintronic Pages: 53
Instrutech VGC301A User Manual preview
VGC301A
Brand: Instrutech Pages: 34
Intersil ISL8088EVAL1Z Application Note preview
ISL8088EVAL1Z
Brand: Intersil Pages: 7
Fego Precision Industrial TP48 Instructions preview
TP48
Brand: Fego Precision Industrial Pages: 2
Gewiss Chorus GWA1521 Technical Manual preview
Chorus GWA1521
Brand: Gewiss Pages: 13
Dometic GP-MPPT-60/10 Installation And Operating Manual preview
GP-MPPT-60/10
Brand: Dometic Pages: 156
Gewiss Chorus GW 90 740 Manual preview
Chorus GW 90 740
Brand: Gewiss Pages: 44
Motortech ITB 100 Series Assembly Instructions Manual preview
ITB 100 Series
Brand: Motortech Pages: 30
ENDA ETC4420 Manual preview
ETC4420
Brand: ENDA Pages: 4
AB Quality 1760-L12AWA Installation Instructions Manual preview
1760-L12AWA
Brand: AB Quality Pages: 16
Kelly Puma MiniKLS7235M User Manual preview
Puma MiniKLS7235M
Brand: Kelly Pages: 36
Kaufman & Robinson eHF 3005A Manual preview
eHF 3005A
Brand: Kaufman & Robinson Pages: 65

Brands by name

Popular brands

Load more brands