Specifications
178
Belt Tension
Belt
Tension No. on TK Gauge 204-427
Model 30:
Alternator Belt
61
Lower Fan Belt (Engine to Idler) SB-210
SB-310
67
79
Upper Fan Belt (Fan to Idler) SB-210
SB-310
74
79
Model 50:
Alternator Belt
29
Compressor Drive Belts
79
Fan Belt
74
Water Pump Belt
35
NOTE: These are the field reset settings. Because it is sometimes difficult to use the TK Gauge 204-427 in the
field, adjust each belt to allow 1/2 inch (13mm) deflection at the center of the longest span.
Specifications
178
Belt Tension
Belt
Tension No. on TK Gauge 204-427
Model 30:
Alternator Belt
61
Lower Fan Belt (Engine to Idler) SB-210
SB-310
67
79
Upper Fan Belt (Fan to Idler) SB-210
SB-310
74
79
Model 50:
Alternator Belt
29
Compressor Drive Belts
79
Fan Belt
74
Water Pump Belt
35
NOTE: These are the field reset settings. Because it is sometimes difficult to use the TK Gauge 204-427 in the
field, adjust each belt to allow 1/2 inch (13mm) deflection at the center of the longest span.
Summary of Contents for SB-210+
