Operating Instructions
96
Mode Menu
Various operating modes can be selected using the Mode
menu. Not all modes may be available, depending on OptiSet
Plus usage and settings of other programmable features. The
following modes may be available.
Turn CYCLE-SENTRY On or Off
The CYCLE-SENTRY Mode can be turned On or Off. If
CYCLE-SENTRY is turned off the unit runs in Continuous
mode. Either CYCLE-SENTRY or Continuous operation may
be disabled via OptiSet Plus. See “Turning CYCLE-SENTRY
On or Off” on page 97.
Keypad Lockout
If enabled in Guarded Access, the keypad can be locked to
prevent unauthorized use. If the keypad is locked only the On
and Off keys function. The keypad will remain locked even if
the unit is turned off and back on. If Keypad Lockout is active,
press and hold any soft key for 5 seconds to deactivate the
feature. See “Selecting Keypad Lockout” on page 99.
Sleep Mode
If enabled in Guarded Access, Sleep Mode is used to keep the
engine warm and the battery charged when the unit is not in
use. When the unit is in Sleep Mode the display will show
“SLEEP” and the current time. See “Selecting Sleep Mode” on
page 101.
•
Program Wakeup Time: This feature allows a wakeup time
to be specified. When the selected time is reached the unit
will start and resume normal operation.
If Wakeup Time is selected:
•
Day to Wake Up: This feature allows the day the unit
is to wake up to be specified.
•
Hour to Wake Up: This feature allows the hour the
unit is to wake up to be specified.
•
Minute to Wake Up: This feature allows the minute
the unit is to wake up to be specified.
•
Run Pretrip on Wake Up: This feature allows a Pretrip
Test to be automatically run when the unit wakes up.
Operating Instructions
96
Mode Menu
Various operating modes can be selected using the Mode
menu. Not all modes may be available, depending on OptiSet
Plus usage and settings of other programmable features. The
following modes may be available.
Turn CYCLE-SENTRY On or Off
The CYCLE-SENTRY Mode can be turned On or Off. If
CYCLE-SENTRY is turned off the unit runs in Continuous
mode. Either CYCLE-SENTRY or Continuous operation may
be disabled via OptiSet Plus. See “Turning CYCLE-SENTRY
On or Off” on page 97.
Keypad Lockout
If enabled in Guarded Access, the keypad can be locked to
prevent unauthorized use. If the keypad is locked only the On
and Off keys function. The keypad will remain locked even if
the unit is turned off and back on. If Keypad Lockout is active,
press and hold any soft key for 5 seconds to deactivate the
feature. See “Selecting Keypad Lockout” on page 99.
Sleep Mode
If enabled in Guarded Access, Sleep Mode is used to keep the
engine warm and the battery charged when the unit is not in
use. When the unit is in Sleep Mode the display will show
“SLEEP” and the current time. See “Selecting Sleep Mode” on
page 101.
•
Program Wakeup Time: This feature allows a wakeup time
to be specified. When the selected time is reached the unit
will start and resume normal operation.
If Wakeup Time is selected:
•
Day to Wake Up: This feature allows the day the unit
is to wake up to be specified.
•
Hour to Wake Up: This feature allows the hour the
unit is to wake up to be specified.
•
Minute to Wake Up: This feature allows the minute
the unit is to wake up to be specified.
•
Run Pretrip on Wake Up: This feature allows a Pretrip
Test to be automatically run when the unit wakes up.
Summary of Contents for SB-210+
