Optional Rear Remote Control Panel
138
Selecting Cycle-Sentry or
Continuous Mode
Cycle Sentry or Continuous Mode operation can be changed
using the Select Key.
1.
Press the Select key once to display the Cycle Sentry
prompt.
Figure 105: Press Select Key
2.
Use the Up and Down Arrow Keys to chose either YES or
nO. Yes = Cycle Sentry Mode. nO = Continuous Mode.
Figure 106: Press Up or Down Arrow Keys
3.
When the desired selection is shown, press the Enter Key
to load the setting. The display will briefly show [Lod] and
then the new selection will briefly appear in the display.
Figure 107: Press Enter Key
4.
The display will then return to the Remote Standard
Display.
Optional Rear Remote Control Panel
138
Selecting Cycle-Sentry or
Continuous Mode
Cycle Sentry or Continuous Mode operation can be changed
using the Select Key.
1.
Press the Select key once to display the Cycle Sentry
prompt.
Figure 105: Press Select Key
2.
Use the Up and Down Arrow Keys to chose either YES or
nO. Yes = Cycle Sentry Mode. nO = Continuous Mode.
Figure 106: Press Up or Down Arrow Keys
3.
When the desired selection is shown, press the Enter Key
to load the setting. The display will briefly show [Lod] and
then the new selection will briefly appear in the display.
Figure 107: Press Enter Key
4.
The display will then return to the Remote Standard
Display.
Summary of Contents for SB-210+
