![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429058.webp)
Operating Instructions
57
Figure 52: Standard Display
IMPORTANT: If the named product is changed using the
“+” or “-” Keys, the change must be confirmed or rejected by
pressing the YES or NO Key within 10 seconds of changing
the named product.
•
If the YES Key is pressed, the product change made with
the “+” or “-” Key is accepted, the product changes, and
the display returns to the Standard Display.
•
If the NO Key is pressed the product change made with
the “+” or “-” Key is not accepted, the product is not
changed, and the display returns to the Standard Display.
•
If the YES or NO Key is not pressed within 10 seconds of
making a change with the “+” or “-” Key, the product is
not changed and the display returns to the Standard
Display. The display briefly shows [SETPOINT NOT
CHANGED] and Alarm Code 127 Setpoint Not Entered is
set, to indicate that the product change was initiated but
not completed.
See Figure 53 for an overview of the Changing the Setpoint -
Named Product procedure.
MENU
45
°F
45
PRODUCT
SENSORS
GAUGES
.8
POTATO, LATE CROP
ON
OFF