Operating Instructions
69
The display then returns to the Standard Display. In the
example shown in Figure 72 the absence of the Cycle Sentry
Icon indicates that the unit is running in Continuous Mode.
Figure 72: Cycle Sentry Icon Not Shown =
Continuous Mode
Pressing the Cycle Sentry/Continuous Key again allows the
operator to change back to Cycle Sentry Mode operation.
IMPORTANT: If the unit is in Cycle Sentry Null and the
mode is switched to Continuous Mode, the unit will start
automatically.
IMPORTANT: Cycle Sentry or Continuous Mode may not be
selectable if OptiSet Plus is in use.
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
