Optional Rear Remote Control Panel
131
Viewing and Clearing Alarm
Codes
Alarm Codes can be displayed and cleared using the Select
Key.
1.
When the Remote Standard Display is shown, press the
Select Key three times. Any alarm codes present will be
shown in the display, with the most recent alarm code
shown first. If no alarm codes are present the display will
show [00].
Figure 171: Press Select Key Three Times
2.
To clear a displayed alarm code, press the Enter Key. The
display will briefly show CLEAr ALm.
Figure 172: Press Enter Key
3.
If any additional alarms are present, the next alarm will be
shown. If no other alarms are present the display will
briefly show [00].
Figure 173: No Alarms Display
4.
The display will then return to the Remote Standard
Display.
