![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429128.webp)
Optional Rear Remote Control Panel
127
Turning the Unit ON or OFF
(Configured for STAND BY
Operation)
The control system is turned on by pressing the ON Key and
off by pressing the OFF Key. When the On Key is pressed the
remote display briefly shows all segments and then StAnd by
as shown in Figure 163. A stand by message will also appear
on the unit Control Panel display. The setpoint can be changed
but the unit will not start and run. Only the Select Key, Enter
Key and Up and Down Arrow Keys are functional. The unit
can be started and run by pressing the unit Control Panel ON
Key.
IMPORTANT: To change the setpoint, press the Select Key to
show the Remote Standard Display. The setpoint can now be
changed as shown on page 128.
Figure 163: Stand By Display
Turning the Unit On and Off
(Configured for RUN Operation)
The unit is turned on by pressing the ON key and off by
pressing the OFF key. When the ON key is pressed the remote
display briefly shows all segments and then COn FIg as the
control system initializes. Then the Remote Standard Display
will appear as shown in Figure 164. The unit will start and run
if necessary.