![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429044.webp)
Operating Instructions
43
The Flash Drive Menu will time out about 30 seconds after the
engine starts. When the Flash Drive Menu times out, the
Standard Display will appear. To go to the Standard Display
immediately press the EXIT Key.
Configurable Soft Keys
When the Standard Display is shown, the default functions of
the two center soft keys are GAUGES and SENSORS.
(Figure 26)
Figure 26: Soft Keys
The functions of these two keys can be changed as required for
customer convenience. The functions of these two soft keys on
the Standard Display can be re-assigned to any of the following
functions using the Guarded Access > Main Menu
Configuration menu:
The GAUGES and SENSORS functions are always available
from the Maintenance Menu.
In the example shown in Figure 27, the soft key functions from
the Standard Display have been changed to PRETRIP and SOT
(Start of Trip marker). The GAUGES and SENSORS functions
are always available from the Maintenance Menu.
Figure 27: PRETRIP and SOT
ON
OFF
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
Gauges
Pretrip
SOT (start of trip)
Sensors
Data Logger
Hourmeters
ON
OFF
MENU
35
°F
35
SET
SOT
PRETRIP
POINT
.8