![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429135.webp)
Optional Rear Remote Control Panel
134
Running a Pretrip Test
A Pretrip Test can be started using the Pretrip Key as long as
the unit is not in STAND BY. If the unit is not running when
the Pretrip Test is started a Full Pretrip Test will be performed.
If the unit is running when the Pretrip Test is started a Running
Pretrip Test will be performed.
1.
Clear any alarm codes as shown previously.
2.
Press the Pretrip Key. The Pretrip [EntEr PrE] prompt will
appear in the display.
Figure 179: Press Pretrip Key
3.
When the Pretrip prompt is shown, press the Enter Key to
start a Pretrip Test. The display will briefly show LOAd
PrE. If the unit is not running a Full Pretrip Test will be
performed. If the unit is running a Running Pretrip Test
will be performed.
Figure 180: Press Enter Key