Optional Rear Remote Control Panel
125
Display
The display normally shows the Standard Display of return air
temperature and setpoint. The icons on either side of the
display indicate operating modes and alarms. The display
shown here has all possible segments lighted. The display
icons are defined below.
Figure 160: Rear Remote Control Panel
TK Logo
Key
Sends a Start of Trip marker to
the data logger.
Defrost Key
Initiates a defrost cycle if
conditions allow.
Cool Icon
This icon appears when the unit is
cooling.
Heat Icon
This icon appears when the unit is
heating.
Modulation
Icon
This icon appears when the unit is
in modulation.
Defrost Icon
This icon appears when the unit is
defrosting.
Cycle-Sentry
Icon
This icon appears when the unit is
operating in Cycle-Sentry mode.
Alarm Icon
This icon appears when an alarm
condition has been detected.
Electric
Standby Icon
This icon appears when the unit is
operating in the optional electric
standby mode.
Setpoint
Icon
This icon appears when the
setpoint is being shown in the
display.
Not Used
This icon appears during a remote
control panel test but is not
currently used.