Operating Instructions
107
•
Allows Keypad Lockout to be selected (if enabled from
the Guarded Access > Main Menu Configuration Menu).
•
Start Sleep Mode (if enabled from the Guarded Access >
Main Menu Configuration Menu).
When shipped from the factory, only the Cycle
Sentry/Continuous Mode is enabled.
If OptiSet Plus is in use some modes may not be available.
To return to the Main Menu press the EXIT Key. To return to
the Standard display press the EXIT Key again.
Using the Change Mode Menu
Mode changes are made using the Mode Menu. From the
Standard Display, press the MENU Key (Figure 130).
Figure 130: Menu Key
The Main Menu will appear. Press the UP or DOWN Key as
required to choose the Mode Menu. When the Mode Menu is
selected, press the SELECT Key to choose the Mode Menu
(Figure 131).
Figure 131: Up, Down, Select Keys
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWN
EXIT
SELECT
UP
DATA LOGGER
HOURMETERS
MODE
ELECTRIC STANDBY
