Operating Instructions
42
Figure 24: Flash Drive
Then FLASH DRIVE DETECTED and the Flash Drive Menu
will appear on the display (Figure 25). The display will be
shown for about 30 seconds and then the Standard Display will
appear. To go to the Standard Display immediately press the
EXIT Soft Key.
Figure 25: Flash Drive Menu
IMPORTANT: The engine start is not delayed by the Flash
Drive Menu shown above. The engine start prompt will
appear and the engine will start. After the engine is started
the display will return to the Flash Drive Menu or the
Standard Display.
If a properly configured USB Flash Drive is connected to the
USB Flash Drive connector, this feature allows the operator to
select the desired Flash Drive function. If enabled when the
Flash Drive was configured, the following functions may be
available:
•
DOWNLOAD
•
“Download the ServiceWatch Data Logger
•
“Download the CargoWatch Data Logger
•
FLASHLOAD
•
“Flash load Base Controller Software
•
“Flash load HMI Control Panel Software
•
OPTISET PLUS
•
SEND
•
“Send OptiSet Plus files
•
RETRIEVE
•
“Retrieve OptiSet Plus files
The Flash Drive is also available from the Main Menu.
ON
OFF
FLASH DRIVE
FLASH DRIVE DETECTED
LOAD
LOAD
PLUS
EXIT
DOWN
FLASH
OPTISET
ON
OFF