![background image](http://html1.mh-extra.com/html/thermo-king/precedent-c-600/precedent-c-600_operators-manual_1104429026.webp)
Unit Description
25
Data Logging
There are two separate data loggers. The data is downloaded
through the USB ports on the front of the control box.
ServiceWatch™:
ServiceWatch is standard equipment. It
records operating events, alarm codes and compartment
temperatures as they occur and at preset intervals. This
information is typically used to analyze unit performance.
CargoWatch™:
CargoWatch data logging requires the
installation of optional sensors. Up to six temperature
sensor/probes and four door switches can be installed.
CargoWatch also logs the setpoint. Use a USB port to
downloaded the CargoWatch data. If optional temperature
sensors are installed, their readings are displayed as Datalogger
Sensor (1-6) Temperature in the sensor readings.
USB Ports:
:
•
The Flash Drive Only USB Port allows a USB Flash Drive
that has been properly configured using the ThermoServ™
Service Tool to be connected to the unit.
•
The PC Computer Only USB Port allows a PC Computer
to be connected to the unit via a standard USB Cable.
1.
Flash Drive Only USB Port
2.
PC Computer Only USB Port
Figure 9: USB Ports
USB PORT
FLASH DRIVE ONLY
USB PORT
PC COMPUTER ONLY
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
THERMO KING
ON
OFF
SR4
Smart Reefer 4
MICRO
PROCESSOR
OFF
ON
1
2