29
4-6-3. :MEASure[:SCALar]:VOLTage[:DC]
Query
Description
Takes a measurement and returns the average output voltage.
Query Syntax :MEASure[:SCALar]:VOLTage[:DC]?
Return
parameter
<NR2>
Returns the voltage in volts. The unit is (V).
Query
example
:MEAS:VOLT?
>+5.000
Returns the average output voltage (V). The output is 5.000 V.
4-6-4. :MEASure[:SCALar]:POWer[:DC]
Query
Description
Takes a measurement and returns the average output power.
Query Syntax :MEASure[:SCALar]:POWer[:DC]?
Return
parameter
<NR2>
Returns the power in watts. The unit is (W).
Query
example
:MEAS:POW?
>+10.000
Returns the average output wattage (W). The output is 10.000 W.
4-7. Output Commands
4-7-1. :OUTPut:DELay:ON
Set
Query
Description
Sets the Delay Time in seconds for turning the output on (F-01).
The delay is set to 0.00 by default.
Syntax
:OUTPut:DELay:ON <NRf>
Query Syntax :OUTPut:DELay:ON?
Parameter
<NRf>
0.00~99.99 seconds, where 0 = no delay.
Return
parameter
<NR2>
Returns the delay on time in seconds until the output is
turned on.
Example
:OUTP:DEL:ON 1
Sets 1 second to the Delay Time for turning the output on.
Query
example
:OUTP:DEL:ON?
>+10.000
Returns the delay on time in seconds until the output is turned on.
4-7-2. :OUTPut:DELay:OFF
Set
Query
Description
Sets the Delay Time in seconds for turning the output off (F-02).
The delay is set to 0.00 by default.
Syntax
:OUTPut:DELay:OFF <NRf>
Query Syntax :OUTPut:DELay:OFF?
Parameter
<NRf>
0.00~99.99 seconds, where 0 = no delay.