12
2-3-3. Socket Server Configuration
Configuration
This configuration example will configure the PFR-100 socket
server.
The following configuration settings will manually assign the
PFR-100 an IP address and enable the socket server. The
socket server port number is fixed at 2268.
4. Connect an Ethernet cable from the network to
the rear panel Ethernet port.
LAN
5. Press the Function key to enter the Normal
configuration settings.
Function
M1
Set the following LAN settings (setting examples from F-39 to
F-54):
F-29 = 5
Turn LAN (Socket) on
F-37 = 0
Disable DHCP
F-39 = 192
IP Address part 1 of 4
F-40 = 168
IP Address part 2 of 4
F-41 = 5
IP Address part 3 of 4
F-42 = 133
IP Address part 4 of 4
F-43 = 255
Subnet Mask part 1 of 4
F-44 = 255
Subnet Mask part 2 of 4
F-45 = 255
Subnet Mask part 3 of 4
F-46 = 0
Subnet Mask part 4 of 4
F-47 = 192
Gateway part 1 of 4
F-48 = 168
Gateway part 2 of 4
F-49 = 5
Gateway part 3 of 4
F-50 = 101
Gateway part 4 of 4
F-51 = 192
DNS part 1 of 4
F-52 = 168
DNS part 2 of 4
F-53 = 5
DNS part 3 of 4
F-54 = 101
DNS part 4 of 4
2-3-4. Socket Server Function Check
Background
To test the socket server functionality, National Instruments
Measurement and Automation Explorer can be used. This
program is available on the NI website, www.ni.com., via a
search for the VISA Run-
time Engine page, or “downloads” at
the following URL, http://www.ni.com/visa/
Requirements
PC Operating System(OS): Windows 7 or higher
Functionality
check
1. Start the NI Measurement and Automation Explorer (MAX)
program.
start>All PROGRAM>National Instruments>Measurement &
Automation
