52
Query
example
:SYST:COMM:SER:TRAN:PAR?
>1
Indicates that odd parity is used for the UART connection.
4-12-14. :SYSTem:COMMunicate:SERial
[:RECeive]:TRANsmit:SBITs
Set
Query
Description
Sets or queries the number of stop bits used for the UART
connection. (F-74)
This setting is only applied after the unit has been reset.
Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit:SBITs
<NR1>
Query Syntax :SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit:SBITs?
Parameter
0
1 stop bit
1
2 stop bits
Example
:SYST:COMM:SER:TRAN:SBIT 1
Sets the number of stop bits used for the UART connection to two
stop bits.
Query
example
:SYST:COMM:SER:TRAN:SBIT?
>1
Indicates that two stop bits is used for the UART connection.
4-12-15. :SYSTem:COMMunicate:MULTidrop
:CONTrol
Query
Description
Queries the Multi-Drop Control state.
Query Syntax :SYSTem:COMMunicate:MULTidrop:CONTrol?
Return
parameter
0
Disable
1
Master
2
Slave
Query
example
:SYST:COMM:MULT:CONT?
>1
Respond to the situation. It is a master unit.
4-12-16. :SYSTem:COMMunicate:USB:FRONt
:STATe
Query
Description
Queries the front panel USB-A port state. (F-20)
Query Syntax :SYSTem:COMMunicate:USB:FRONt:STATe?
Return
parameter
0
Absent
1
Mass Storage
Query
example
:SYST:COMM:USB:FRON:STAT?
>1
Return the status of the USB connection on the front panel.
4-12-17. :SYSTem:COMMunicate:USB:REAR
:STATe
Query
Description
Queries the rear panel USB-B port state. (F-21)
Query Syntax :SYSTem:COMMunicate:USB:REAR:STATe?
