TEXIO DCS-9700 Series, Instruction Manual

Page: 180 / 188

168
Trigger Source CH1 ,CH2, CH3, CH4, Line, EXT, D0-D15
Trigger Mode Auto (supports Roll Mode for 100 ms/div and
slower), Normal, Single
Trigger Type Edge, Pulse Width(glitch), Video, Pulse Runt,
Rise & Fall(slope), Timeout, Alternate,
Event-Delay(1~65535 events),
Time-Delay(duration,10nS~10S),
Logic*, Bus**with Logic Analyzer Option
Holdoff range 10nS to 10S
Coupling AC,DC,LF rej. ,Hf rej. ,Noise rej.
Sensitivity DC ~ 100MHz
100MHz ~ 200MHz
200MHz ~ 300MHz
Approx. 1div or 1.0mV
Approx. 1.5div or 15mV
Approx. 2div or 20mV
External
Trigger Range ±15V
Sensitivity DC
100MHz
200MHz
~ 100MHz
~ 200MHz
~ 300MHz Approx. 100mV
Approx. 150mV
Approx. 150mV
Input
Impedance
1MΩ// 16pF
Horizontal Time base
Range 1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 1000 div maximum.
Accuracy
±20 ppm over any ≥ 1 ms time interval
Real Time
Sample Rate 1CH: 2GSa/s
2CH: 1GSa/s
ET Sample
Rate 100GSa/s maximum
Record Length 1CH: 2Mpts(10div)
2CH: 1Mpts(10div)
Acquisition
Mode Normal, Average, Peak Detect, Single
Peak (glitch)
Detection 2nS (typical)
Average selectable from 2 to 256
X-Y Mode X-Axis Input Channel 1; Channel 3*
Y-Axis Input Channel 2; Channel 4*
Phase Shift ±3° at 100kHz
Cursors and Cursors Amplitude, Time, Gating available