165
10-3. Probe Compensation
Panel Operation 1. Connect the probe between the Channel 1 input
and the probe compensation output (Demo 3
output, by default set as 2Vp-p, 1kHz square
wave) on the front panel. Set the probe
attenuation to x10.
2. Alternatively, the probe compensation signal
can be changed. See page 116 for details.
POSITION
CH1
Demo
x1
x10
X
1
0
X
1
CH1
Demo
3. Press the
CH1
key to activate
CH1.
CH1
4. Set the
Coupling
to DC from the
bottom menu.
5. Set the Probe attenuation to
Voltage, 10X
.
Page 94
6. Press the
Autoset
key. The
compensation signal appears on
the display.
Autoset
7. Press the
Display
key, then
set the display type to
Vector
.
Display
8. Turn the adjustment point on the probe to make
the waveform as square as possible.
