80
4-2-7. Automatic Measurement
Note
To use automatic measurements with the
segmented memory, automatic measurements
must first be selected from the Measure menu
before a segment is run. Digital channels cannot
be used with this function.
Setup
Press the
Measure
key and select
any
single
source measurement
from the
Add Measurement
menu.
See the user manual for details on
how to add automatic
measurements.
Measure
Operation
1. Press
Analyze Segments
from the
Segments menu.
Note: This key will only be
available in the Stop mode.
2. Press
Segments Measure
.
3. Select either the
statistics or the
measurement list from
the side menu.
Statistics
List
4. The statistics table or measurement list appears
on the display.
Note that the more segments that you have, the
longer it will take to calculate the statistics or list
the measurement results.
5. For statistic
measurements, press
Plot
Source
to choose which
automatic measurement to
use for the statistics
calculations.
6. For the measurement list, press
Source
and select the source
channel for measurement.
Range
CH1 ~ CH4
