72
4. Press
Digital Filter
and set the
digital frequency using the Variable
knob.
Turn the Variable knob fully
anticlockwise to turn the digital
filter off.
4-1-3. Show Waveform in XY Mode
Background
The XY mode maps the input of channel 1 to the
input of channel 2. the input of channel 3 can be
mapped to the input of channel 4. This mode is
useful for observing the phase relationship
between waveforms.
Reference waveforms can also be used in XY
mode. Ref1 is mapped to Ref2 and Ref3 is
mapped to Ref4. Using the reference waveforms is
the same as using the channel input waveforms.
Connection
1. Connect the signals to
Channel 1 (X-axis) and
Channel 2 (Y-axis) or
Channel 3 (X2-axis) and
Channel 4 (Y2-axis).
CH3
CH2
CH1
CH4
Y
X
X2
Y2
2. Make sure a channel pair is active
(CH1&CH2 or CH3&CH4). Press
the Channel key if necessary. A
channel is active if the channel key
is lit.
CH1
CH1
CH2
CH2
Panel Operation 1. Press the
Acquire
menu key.
Acquire
2. Press
XY
from the bottom menu.
3. Choose
Triggered
XY
from the side
menu.
