19
8. Compensate
Probe
Turn the adjustment point on the probe to make
the square waveform edge flat.
Under
Compensation
Normal
Over
Compensation
9. Start
Operation
Continue with the other operations.
Measurement: page 44 Configuration: page 70
Save/Recall: page 125
File Utilities: page 141
Apps.: page 118
Hardcopy key: page 147
Remote Control: page
150
Maintenance: page 163
1-4-6. How to Use This Manual
Background
This section describes the conventions used in
this manual to operate the DCS-9700.
Throughout the manual any reference to pressing
a menu key refers to the keys directly below or
beside any menu icons or parameters.
When the user man
ual says to “toggle” a value or
parameter, press the corresponding menu item.
Pressing the item will toggle the value or
parameter.
Active parameters are highlighted for each menu
item. For example in the example below, Coupling
is currently set to DC.
If a menu item can be toggled from one value or
parameter to another, the available options will be
visible, with the current option highlighted. In the
example below the slope can be toggled from a
rising slope to a falling slope or either slop.
