59
3-3. Cursor Measurement
Horizontal or vertical cursors are used to show the position and
values of waveform measurements and math operation results.
These results cover voltage, time, frequency and other math
operations. When the cursors (horizontal, vertical or both) are
activated, they will be shown on the main display unless turned off.
(page 86).
3-3-1. Use Horizontal Cursors
Panel Operation/
Range
1. Press the
Cursor
key once.
Cursor
2. Press
H Cursor
from the bottom
menu if it is not already selected.
3. When the H Cursor is selected,
repeatedly pressing the
H Cursor
key or the
Select
key will toggle
which cursor is selected.
OR
Select
Range
Description
Left cursor ( ) movable, right
cursor position fixed
Right cursor ( ) movable, left
cursor position fixed
Left and right cursor ( + )
movable together
4. The cursor position
information appears on the
top left hand side of the
screen
Cursor
Hor. position, Voltage/Current
Cursor
Hor. position, Voltage/Current
Delta (difference between cursors)
dV/dt or dI/dt
5. Use the
Variable
knob to move the
movable cursor(s) left or right.
VARIABLE
