152
PC Connection Use a Null Modem connection as shown in the
diagram below.
DSO
PC
RxD
Pin2
RxD Pin2
GND
Pin5
GND Pin5
TxD Pin3
TxD
Pin3
9-3. Configure the Ethernet Interface
Ethernet
Configuration
MAC Address
Domain Name
Instrument Name DNS IP Address
User Password
Gateway IP Address
Instrument IP
Address
Subnet Mask
HTTP Port 80 (fixed)
Note
The Ethernet option, DS2-LAN, must first be
installed before proceeding. Please see page 15
for further details.
Background
The Ethernet interface is used for remote
configuration of the oscilloscope over a network
using the integrated web server or for remote
control using a socket server connection. For
details, the Socket Server section on page 154.
Panel Operation 1. Connect the Ethernet cable to the
LAN port on the DS2-LAN module.
2. Press the
Utility
key.
Utility
3. Press
I/O
from the bottom menu.
4. Press
Ethernet
from the side
menu.
5. Set
DHCP/BOOTP
to
On
or
Off
from the side menu.
Note
IP addresses will automatically be assigned with
DHCP/BOOTP set to on. For Static IP Addresses,
DHCP/BOOTP should be set to off.
