15
1-4-2. Module Installation
Background
The DCS-9700 has a number of optional modules
that can be installed into the module slots on the
rear panel. These modules must be installed
before power up.
Note
The modules are not hot-swappable. Please
ensure the power is off before connecting or
disconnecting any of the modules from the rear
panel.
Steps
1. Make sure the power is turned off before
installing any of the optional modules.
2. Slide the tabs holding the module cover to the
unlock position and then remove
3. Install the optional module. Be sure to make
sure that the groves on the module line-up to
the slots in the module bay.
4. Slide the tabs back into the lock position.
