106
4-6-10. Using Rise and Fall (slope) Trigger
Panel Operation 1. Press the trigger
Menu
key.
Menu
2. Press the
Type
key from the lower
bezel menu.
3. Select
Others
→
Rise and
Fall
from the side menu.
The Rise and Fall indicator
appears at the bottom of
the display.
From left: Slope, source, high/low threshold,
threshold level, coupling
4. Press
Source
from the lower menu.
Use the side menu to select a source.
Range
Channel 1 ~ 4
5. Press
Slope
from the bottom menu
to toggle the slope.
Range
Rising edge, falling edge, either
6. Press
When
from the lower menu.
Then use the side menu to select the logic
conditions and true or false status.
Condition
> , < , = , ≠
Width
10ns ~ 10s
7. Press
Threshold
from the lower
bezel to edit the High and Low
threshold.
Range
High: -XXV~XV
Low: -XXV~XXV
Set to TTL 1.4V
Set to ECL -1.3V
