120
Set Go-NoGo
Conditions
Select the Go-NoGo conditions (NG When) and
actions when a Go-NoGo condition has been met
(Violating).
1. Press
NG
When
from the bottom
menu and select the NoGo
conditions:
Enters: Sets the NoGo condition to
when the input signal stays within
the limit boundary.
Exits: Sets the NoGo condition to
when the input signal exceeds the
limit boundary.
2. Press
Go Back
to return to the
previous menu.
Set Go-NoGo
Actions
1. Press
Violating
to set what action
to perform when a signal is
violating the Go-NoGo conditions.
The waveform stops when the
conditions are violated.
The waveform stops and a beep will
be output when the conditions are
violated.
Ignore violations and continue to
monitor the signal.
Output a beep when a violation
occurs, but continue to monitor the
signal.
2. Press
Go Back
to return to the
previous menu.
Set Go-NoGo
Source
1. Press
Compare Source
from the
bottom menu to set the Go-NoGo
boundary source.
Sets CH1 as the source.
Sets CH2 as the source.
Sets CH3 as the source.
Sets CH4 as the source.
