47
Freeze
Waveform by
Single Trigger
Mode
Press the
Single
key to go into
the Single Trigger mode. The
Single key turns bright white.
In the Single Trigger mode, the
scope will be put into the pre-
trigger mode until the scope
encounters the next trigger
point. After the scope has
triggered, it will remain in Stop
mode, until the
Single
key is
pressed again or the
Run/Stop
key is pressed.
Single
Single
Waveform
Operation
The waveform can be moved or scaled in both Run
and Stop mode, but in different manners. For
details, see page 87 (Horizontal position/scale) and
page 91 (Vertical position/scale).
3-1-4. Horizontal Position/Scale
For more detailed configuration, see page 87.
Set Horizontal
Position
The horizontal position knob
moves the waveform left and
right.
POSITION
As the waveform moves, the display bar on the top
of the display indicates the portion of the waveform
currently shown on the display and the position of
the horizontal marker on the waveform.
Position
Indicator
The horizontal position is shown at the bottom of
the display grid to the right of H icon.
Select
Horizontal Scale
To select the timebase (scale),
turn the
TIME/DIV
knob; left
(slow) or right (fast).
TIME/DIV
Range
1ns/div ~ 100s/div, 1-2-5 increments
The Time/Division rate is displayed to the left of the
H icon at the bottom of the screen.
