Texas Instruments Avigo, User Manual

Page: 68 / 132

4 - 4 Avigo User’s Guide
3. Tap one of the two options below Event to determine how Event timing
information will be displayed
¦
Start Time & End Time (Example: 1100am–1230pm)
¦
Start Time & Duration (Example: 1100am & 1 hour 30 minutes.)
4. Open the list box to the right of Default duration to select a default time
allotted for each new Event . Choose 15 minutes , 30 minutes , or 1 hour .
Note: You can change this as needed when actually scheduling Events .
5. Open the list box next to the Time slot box to select the time allotted for each
time slot in your day. Choose 15 minutes , 30 minutes , or 1 hour .
6. Tap
(
to save your changes or tap
)
to return to the previous screen without
saving them.
Scheduling Events
Scheduling Events is quickly and easily done: 1) a category is selected or created,
2) dates and times are selected, 3) various fields are filled out, and 4) boxes are
checked. Custom fields may need to be created as well. What follows are the steps
for scheduling an
Event .
To schedule an Event:
1. Tap
-
at the bottom of Calendar , or press the schedule key.
2. If necessary, tap
<
to select a date for the Task .
Note: You may also locate the date by:
¦
Displaying Schedule view
¦
Tapping
4
or an open time slot to display the New Event screen
¦
Tapping the Date box to display the Date Picker screen.
¦
Using the Date Picker to select a date.
3. Open the Primary list box and choose or create a Schedule category for the new
Event .
The first time you view the category list, a default schedule category called
unfiled will be displayed.
A total of eight schedule categories may reside on Avigo. To add or change the
names of categories, see
Adding and Editing Categories in Chapter 2: Quick
Start Short Cuts .