TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 94 / 208

12. Use open-ended wrench to tighten mounting screw
( Fig. 79 /1).
13. Check screw connection for correct and tight fit
(tightening torque about 20 Nm).
14. Return the open-ended wrench to the document
box ( Fig. 79 /2).
6.10 Operate lifting device (optional)
Optionally, a lifting device (Fig. 80) can be mounted
instead of the working basket. Operation takes place via
the cable remote control. For this, an extension cable
must be connected between the plug connection of the
control console in the working basket and the cable
remote control. See also the separate operating instruc-
tions for the lifting device.
The lifting device is optional. To operate, follow the
operating instructions attached to the machine file.
6.11 Emergency operation
Personnel: n Trained people
Protective equipment: n Protective clothing
n Safety boots
n Protective helmet
The aerial lift platform has an emergency operation
mode which allows operation of the aerial access plat-
form even without a voltage supply.
Fig. 79: Mounting screw
working basket
Fig. 80: Lifting device
Operation
13.02.2013 Aerial access platform Leo15GT 2012 90