TEUPEN LEO 15 GT Translation Of The Original Operating Instructions Download Page 100

Page: 100 / 208

Using the lever (

Fig. 92

/1), turn the ‘outrigger and

platform’ valve to the right to the outrigger and

platform function (

Fig. 93

/1).

Screw the emergency hand lever (

Fig. 93

/1) into

the ‘outrigger and platform’ (

Fig. 93

/2) valve so

that it is locked on outrigger and platform function.

For outrigger operation, screw the valve

(

Fig. 94

/1) in clockwise up to the stop.

For platform operation, screw the valve

(

Fig. 94

/2) in clockwise up to the stop.

Always screw in only one valve

(Fig. 94/1 or 2). The other one must be

unscrewed.

To carry out the desired machine movements,

press the valves for outrigger and platform function

according to the valve setting

Chapter 6.12.1 ‘Service operation bracing and

platform functions’ on page 95 and at the same

time, press the green button for the service opera-

tion.

After completing work, unlock all valves again.

Fig. 92: Adjusting outrigger

and platform functions

Fig. 93: Screw in the emer-

gency hand activator

Fig. 94: Activating function

Operation

13.02.2013

Aerial access platform Leo15GT 2012

Summary of Contents for LEO 15 GT

















































































































































































































Search results

Summary of Contents for LEO 15 GT

Reviews:

Related manuals for LEO 15 GT

Brands by name

Popular brands

TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Search results

Summary of Contents for LEO 15 GT

Reviews:

Related manuals for LEO 15 GT

Brands by name

Popular brands