TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 127 / 208

WARNING!
Danger of injury due to hot materials!
Operating materials (coolant liquids or motor
oils) can attain high temperatures in use. Skin
contact with hot materials causes severe
burns to the skin.
– Avoid contact with hot operating materials.
– Check before all work with operating
materials, as to whether these are hot. If
necessary, allow them to cool.
The following applies in principle:
1. Immediately initiate an emergency stop in the
event of faults posing an immediate danger to
people or property.
2. Ascertain the cause of the fault.
3. If fault rectification requires work in the danger
zone, shut down the machine and secure to pre-
vent restarting.
Immediately notify those responsible at the place
of use about the fault.
4. Depending on the nature of the fault, have it recti-
fied by authorised specialised personnel or rectify
it yourself.
The fault table below provides information
about who is authorised to rectify the fault.
8.2 Fault table
If the fault is not included in the table below or
if it cannot be repaired with the measures
described, make contact with the manufac-
turer (see page 2 for the contact data).
Hot operating materials
Behaviour in the event of faults
Faults
13.02.2013 Aerial access platform Leo15GT 2012 123