TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 90 / 208

3. Lift the machine up using the outriggers until the
crawler chassis is unloaded ( Fig. 68 /h = max.
20 mm) (
Ä
Chapter 6.5 ‘Putting the machine in
work position’ on page 72).
4. Insert the locking lever ( Fig. 69 /1) for the chassis
adjustment in the locking bolts ( Fig. 69 /2).
The locking lever for the chassis adjust-
ment is located behind the control box
cover.
WARNING!
Danger of injury due to crushing between
crawler chassis and floor!
When operating the chassis adjustment,
there can be severe injuries due to crushing
between the crawler chassis and the floor.
– Make sure that there are no limbs
between the crawler chassis and the floor.
5. Release the locking mechanism by pressing the
locking lever ( Fig. 69 /1) in the direction of the
arrow.
ð
The crawler chassis slips out down to the floor.
6. Hold the locking lever ( Fig. 69 /1) in an open posi-
tion and carefully lift the two outriggers on the
crawler chassis side (meaning lowering the chassis
on that side) in order for the crawler chassis to
insert ( Ä Chapter 6.5 ‘Putting the machine in work
position’ on page 72).
7. Let go of the locking lever ( Fig. 69 /1) and remove.
8. Keep lowering the chassis until the locking bolt
audibly latches in.
Fig. 68: Unload the crawler
chassis
Fig. 69: Locking lever
Fig. 70: Moving in the crawler
chassis
Operation
13.02.2013 Aerial access platform Leo15GT 2012 86