TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Page: 76 / 208

6.5 Putting the machine in work position
Personnel: n Trained people
Protective equipment: n Protective clothing
n
Safety boots
n Protective helmet
n Safety harness
WARNING!
Danger of injury due to improper bracing!
With improper bracing, the machine can tip or
slide. This can cause severe injuries and sig-
nificant property damage.
– Always put the safety harness on when in
the working basket.
– Always perform all work with at least two
people.
– Ensure sufficient load capacity of the sub-
surface (
Ä
Chapter 3 ‘Technical data’
on page 39 ).
– Heed maximum guard rail angle
( Ä Chapter 3 ‘Technical data’
on page 39 ).
– If necessary, use base plates.
– Make sure that the base plates are
aligned horizontally (maximum deviation
of
±
8°).
– Do not anchor the outriggers with chains,
ropes, pegs, etc.
– Always observe the movement of the out-
riggers when extending.
– Make sure that no people, supply lines or
other objects are in the area around the
outriggers.
In order to put the machine in work position, the outrig-
gers can be extended manually or automatically.
Bracing the machine can optionally be carried out from
the basket or with the control panel as cable remote
control.
Operation
13.02.2013 Aerial access platform Leo15GT 2012 72