TEUPEN LEO 15 GT Translation Of The Original Operating Instructions Download Page 57

Page: 57 / 208

4.7

Accessories

4.7.1

Keys

The scope of supply includes various keys. They are

used, among other things, for opening the control desk,

control box, etc.

4.7.2

Safety harness (optional)

A safety harness must be worn for all work in the

working basket. This can be ordered from the manufac-

turer. Please see page 2 for the contact data.
Item no. 8300/0174

4.7.3

Lifting device (optional)

No aerial access platform must be installed

on the Leo13GT and Leo15GT, with control

connection at the chassis.

Optionally, a lifting device (Fig. 29) can be mounted

instead of the working basket. Operation takes place via

the cable remote control. See also the separate oper-

ating instructions for the lifting device.
Item no. 0900-0446

Fig. 28: Keys

Fig. 29: Lifting device

Structure and function

13.02.2013

Aerial access platform Leo15GT 2012

Summary of Contents for LEO 15 GT

















































































































































































































Search results

Summary of Contents for LEO 15 GT

Reviews:

Related manuals for LEO 15 GT

Brands by name

Popular brands

TEUPEN LEO 15 GT, Translation Of The Original Operating Instructions

Search results

Summary of Contents for LEO 15 GT

Reviews:

Related manuals for LEO 15 GT

Brands by name

Popular brands