Teltone TSP Edge User Manual Download Page 25

Page: 25 / 177

TSP Edge User’s Manual

40-400-00065, Rev. E

Templates

define protocols, timings and signaling to be applied to channels within

one or more units.

Control Sets

define the action to be taken (such as call origination), which channels

are to be used, what templates are assigned to those channels, and when the action is
to start and stop.

Main Window

Once all connections have been made and the unit is powered up, start the Edge
configuration software.

The main window starts with a default project file and is ready for configuring the
Edge (see Figure 12).

Figure 12. Configuration Software New Project

Menus

File – for creating, opening and saving project files, and exiting the program.

View – to access and clear the event log and to access Options.

Units – to edit unit-specific parameters for each Edge unit, and to initialize a unit.

Templates – to edit templates.

Control Sets – to edit control sets.

Tools – to access the Diagnostic and Trace functions.

Help – to access the Help file and About dialog box.

Summary of Contents for TSP Edge


















































































































































































Search results

Summary of Contents for TSP Edge

Reviews:

Related manuals for TSP Edge

Brands by name

Popular brands

Teltone TSP Edge, User Manual

Search results

Summary of Contents for TSP Edge

Reviews:

Related manuals for TSP Edge

Brands by name

Popular brands