Teltone TSP Edge User Manual Download Page 131

Page: 131 / 177

TSP Edge User’s Manual

40-400-00065, Rev. E

121

Version
Number

Description

4.0

Changes to TSP-EDGE:

Added hook flash detection to analog FXS operation.

Added internal warranty tracking and support for extended warranties.

Added support for purchase of software upgrades for out-of-warranty units.

Improved Voice Detect algorithm in scripts.

Changed reference level for User Defined tones (increases by 6 dB).

Fixed audio path anomalies when more than two modules are

installed.
Changes to TSP-BASE:

Fixed PRI problem with call-confirm recognition when configured as CPE.

Changes to the TSP configuration software:

Changed authorization code scheme to use license codes instead.

Fixed problems in user interface for PCs configured for other countries.

Fixed the TSP configuration software so that PRI channels and FXO channels

can be assigned to same Switch Emulation control set.

Changes to TSP ScriptBuilder:

Fixed TSP ScriptBuilder so that User Defined tones allow single tone.

4.1

Added separate warranty tracking for hardware and software to support extended
warranties.
Fixed download error problem for units with FXO modules installed.
Removed internal warranty tracking requirements for evaluation units.

Summary of Contents for TSP Edge


















































































































































































Search results

Summary of Contents for TSP Edge

Reviews:

Related manuals for TSP Edge

Brands by name

Popular brands

Teltone TSP Edge, User Manual

Search results

Summary of Contents for TSP Edge

Reviews:

Related manuals for TSP Edge

Brands by name

Popular brands