21
4.2 Device settings menu
You can configure the device settings in the
submenus available in the “
Device settings
” menu.
Changing the device settings
: In order to change the device settings, reading the settings
stored in the device is needed, which is done automatically after connecting to the device.
However, you can also read the settings manually anytime by clicking on
the “
Read
”
button in any submenu under the
“
Device settings
” menu group. Writing the new settings into
the device using the “
Write
”
button is not possible until the settings are read. After making
changes in the settings, write the settings into the device by clicking on the “
Write
”
button. The program will warn you to write the settings when leaving a page where changes
have been made.
Overwriting the device settings
: If you want to completely overwrite the settings, you can
import and write data from a from a previously made system backup. To create a system
backup file, configure the desired settings in the submenus, and then click on the
“
Save to file
”
button
in the “
General
” device settings menu. You can import the saved
backup
into the program using the “
Load from file
”
button, and then write imported
settings into the device by clicking on the
“
Write
”
button. This is useful when you want
to configure many devices with the same settings.
