22
4.2.1 General
In this menu you can configure the general settings of the device.
Available options:
Reading the settings from the device:
To read the settings from the device click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Saving settings to file:
To save all device settings to file click on the “
Save to file
” button.
Loading settings from file:
To load saved settings from file click on the “
Load from file
” button.
Updating the firmware:
By clicking on the
“
Firmware update
” button, the firmware of the device can be
updated. Clicking on the button, opens a pop-up window, where you can browse the
firmware file with
tf3
extension. When firmware upload is finished, the progress window
closes automatically and 5 seconds later the device restarts with the new firmware.
Please note that the settings have to be written in the device in order to be applied after a
change is made. For this, click on the “Write”
button.
