26
4.2.2 Inputs
In the “
Inputs
” menu you can configure the default state of the 4 contact inputs, input activation
and restore sensitivity, the event code, partition and zone number used for reporting to a remote
monitoring station, and you can also enable or disable reporting of input events to a monitoring
station.
You can enable Push message sending about input events in th
e “
Mobile devices
” menu.
The text of Push messages can be configured for each input separately in the mobile application.
Available options:
Reading the settings from the device:
To read the settings from the device click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Editing input settings:
To edit the settings of the selected input click on the “
Edit
” button.
Please note that the settings have to be written in the device in order to be applied after
a change i
s made. For this, click on the “Write”
button.
Input properties:
Identifier
: the identifiers of the inputs cannot be changed. They are used to identify the inputs in
the program.
