28
4.2.3 Output
In this menu
you can configure the control mode of the device’s relay output. The output can be
solely controlled using the mobile application. When controlled by a user, the output will operate
according to the configured control mode.
The output can be used to arm and disarm the connected alarm system using the mobile
application, if the given alarm system supports arming and disarming by an external dry contact.
Apart from this, the output can be used for other control purpose too, considering the load rating.
Available options:
Reading the settings from the device:
To read the settings from the device click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Please note that the settings have to be written in the device in order to be applied after
a change is made. For this, click on the “Write”
button.
