11
3.2.2 Remote connecting to devices via cloud service
This connection type can be used if the ecoLINE PRO
device is connected to the cloud.
A prerequisite for this is that the APN should be configured, and a SIM card with available
mobile Internet service should be installed in the device, which may use either a public or
a private APN, but in the latter case, you have to arrange with the mobile service provider
to open the given private APN for accessing the cloud server IP address at 52.30.109.179,
port: 2020. In order to connect to the cloud, cloud usage should be enabled in the settings,
in the “Functions and permissions” menu. If you don’t want to enable permanent cloud
usage due to the data use that it involves, it is possible to command the device by SMS to
connect temporarily to the cloud, about which you can read more in the below.
With this connection type, connection between the device and the
ecoLINE PRO
programming
software will be established through the cloud server operated by the manufacturer.
Device password
: the security password of the device (default superadmin password:
1234
).
Device ID
: the device identifier of the
ecoLINE PRO
device to which you wish to connect.
The format of this unique, burned-in during production and thereby unchangeable device identifier
used for cloud connection is:
FF:FF:FF:FF:FF:FF
(6x2 hexadecimal characters).
You can read the device ID of the given device in the “
Device ID
” section of the “
Status
monitoring
” menu, when connected to the device. The device will also send its device ID as a
reply to your request for connecting to the cloud server, sent by SMS to the device, about which
you can read more below.
Connecting to the device through the cloud server:
Select the “
Cloud
” option in the “
Connection type
” section.
If you have registered the device in the "
Device register
" menu, select the device you want
to access from the "
Device Name
" drop-down menu, or enter the device ID of the device
in the "
Device ID
" field, and the connection password in the “
Device password
” field.
Connection password:
o
Super administrator permission: full access to all settings. (Default password:
1234
).
o
Installer permission: can only access settings enabled by the super administrator. The
installer password should be configured separately (see chapte
r “
o
Connecting remotely without a password is not possible.
