Tektronix WFM 601i, User Manual

Page: 27 / 135

Installation
WFM 601i Serial Component Monitor
1–9
Do not attempt to carry a cabinetized instrument without installing the mounting
screws. Without the mounting screws there is nothing to hold the instrument in
the cabinet if it is tipped forward.
The instrument is secured to the cabinet by two 6-32 Pozidrive
r
screws, located
in the upper corners of the rear panel. See Figure 1-3.
Cabinet Mounting Screws
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
Figure 1-3: Rear view of the WFM 601i.
The optional 1700F05 side-by-side rack adapter, shown in Figure 1-4, consists of
two attached cabinets. It can be used to mount the WFM 601i and another
half-rack width instrument, such as an analog component monitor (Tektronix
WFM 300A or 1760-Series), in a standard 19-inch rack.
Cabinetizing
Rack Adapter