Tektronix WFM 601i, User Manual

Page: 19 / 135

WFM 601i Serial Component Monitor
1–1
Product Description
The WFM 601i is capable of measuring and monitoring 4:2:2 component serial
digital. It displays the video signal in the familiar component analog
representation, either paraded or overlaid. An equivalent time sampler is
incorporated to show the eye pattern of the serial signal. Data integrity is verified
by the EDH (Error Detection and Handling) system, and by a suite of serial
digital format checks.
Features
The following list composes the feature set for the WFM 601i.
H
Eye Pattern Display of the Selected Serial Input.
H
Serial Jitter Measurement; three selectable bandwidths.
H
Serial Format Checking.
H
EDH: (Follows A/B switching) LED for presence and an alarm, rear panel
TTL low through Remote Connector.
H
RGB or Y P
B
P
R
display format.
H
Any or all of channels 1, 2, or 3 displayed.
H
Parade or Overlay display.
H
Flat, Low Pass, or Diff’d Step filtering.
H
X1, X5, X10, and Variable Vertical gain.
H
Line and Field sweeps.
H
200 ns/div Line sweep.
H
Bar Cursors; amplitude, time, amp time, and marker.
H
Line Select with readout; 1 line or 15 line, all fields or 1 of 2 fields. Bright
up of selected lines on Picture Monitor Out (Y or G Channel).
H
Vector Display; fixed or variable gain, 75% or 100% bars, SMPTE/EBU
N10.
H
Lightning or Diamond display; vertical gain, 75% or 100% bars,
SMPTE/EBU N10.
H
Electronic graticules for Lightning, Diamond, and Vector displays.